Azbil MagneW Two-wire PLUS+ MTG15A, Руководство пользователя

Страница: 69 / 280

4-3
4-2. Stopping
Note) When stopping the instrument from operation and shutting down the output to control
equipment, always change over the control equipment to manual control. This is for
preventing the instrument's output shutdown from directly influencing the control
equipment.
When the following operations are performed, new or changed data are saved in
nonvolatile memory.
The time required to write data to nonvolatile memory is about 1 minute, so do not stop
operation during that time.
• Checking data and changing the mode to MEASURING MODE with the data setting
device
• Changing data and changing the mode to MEASURING MODE with the data setting
device
•
Changing data via HART or SFN communication
Procedure
When stopping the instrument, follow the following procedure:
Step Procedure
1
Change over the control equipment of this instrument to be stopped to manual
control.
2 Turn off power.