Azbil MagneW Two-wire PLUS+ MTG15A, Руководство пользователя

Страница: 108 / 280

5-38
5-6-1. Setting ID
You can enter a unique 8-digit alphanumeric code for the flowmeter.
Up to eight alphanumeric characters using any combination of letters (A to Z), numbers (0 to
9), - (dash), / (slash), space and period.
Set an ID in accordance with the following procedure:
Step Procedure Screen
1 Enter ENGINEERING MODE (see section 5-5-10. on
page 5-33) and display the screen where the ID is to
be set.
12.3 %
# ID SET
XXXXXXXX
2 Press the

key to move the cursor to the position
under a desired character to be changed.
12.3 %
# ID SET
XXXXXXXX
3 Press the

or

key to select a desired character.
12.3 %
# ID SET
FXXXXXXX
4 If a target TAG NO. has been set, press the

key to
move the cursor to the position under #.
Press the MODE key to return to MEASURING
MODE and to save data.
12.3 %
# ID SET
FIC-0001