Azbil F7M, Руководство пользователя

Страница: 16 / 58

1-8
Chapter 1. INTRODUCTION
„ „ Installing the USB Loader Cable Device Driver
A device driver must be installed before using the USB loader cable. Follow the
procedure below to install the device driver on the PC.
„ „ Installing the device driver
Handling Precautions
•
Before installing the device driver, unplug the USB loader cable from the PC.
•
Be sure to follow the procedure below when installing the device driver. The
USB cable may not be recognized if the procedure is not followed. If the loader
cable is not recognized, uninstall the device driver and reinstall it.
•
If a problem occurs and installation is not successful, uninstall the driver and
reinstall it.
•
To install the device driver, administrator rights on the computer are required.
Installation should be done by the administrator or by a user who belongs to
the administrator group.
•
A USB loader cable with a label that does not indicate a revision number is not
compatible with Windows 10. (As of 12/11/2017, available USB loader cables have a
label saying “REV.06,” and are compatible with Windows 10.)
(1) Open the
[slpf7m_en]
folder where the loader was installed and double-click
drvsetup.exe.
Note
•
If you did not change the destination folder in
„
Installing the Loader
(P. 1-5) , the file is stored in the following default folder:
•
64-bit Windows: C:\Program Files(x86)\slp\slpf7m_en
•
32-bit Windows: C:\Program Files\slp\slpf7m_en