Introduction
Thank you for purchasing the Ayra UV LED Blaster. This versatile spot armature is designed to create the
traditional blacklight-effect and features an impressive 70W multi-chip LED light source and a replaceable
optic to adjust the beam angle, if so desired. This manual provides all the information you need to know
about the product before you start using it.
We advise that you read this user manual in its entirety before unpacking the contents of the box, so that you
are familiar with all of the functionality that this product has to offer. Please be sure to check that all of the
parts and accessories listed below under 'Box contents' are included in the package. In the event that the UV
LED Blaster does not function properly, or if you have any issues while operating it, please remove the plug
from the power socket and contact your dealer for assistance.
Box contents:
- Ayra UV LED Blaster armature
- Suspension bracket
- Mounting materials (2x tightening knob, 2x rubber ring)
- Power cable IEC C13 to Schuko, 1,5 mm²
Please inspect the device and the included accessories.
Should you discover that either the device or one or more of the included parts have been damaged or
rendered defective while in transit, please contact your dealer directly.
Please note that the pictures in this user manual serve illustrative purposes only and may differ from the
actual product.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials: 07-10-2019RV
Revision date and author's initials: -
