background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

GMOS-LAN-06

I N S TA L L AT I O N I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION 

REV. 7/3/18 INSTGMOS-LAN-06

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun, 

  solder, and heat shrink 
• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Connections to be made .......................................2
Installing the GMOS-LAN-06 .................................3
Programming the GMOS-LAN-06 .........................3
Adjusting the GMOS-LAN-06 .................................3
Troubleshooting .....................................................3

Saturn 

OnStar interface

 

2006-2007

APPLICATIONS

•  Provides accessory power 

(12-volt 10-amp)

•  Maintains the retained 

accessory power (R.A.P.) feature

•  Retains OnStar/OE Bluetooth

•  Adjustable volume for OnStar
•  Designed for non-amplified 

models with OnStar

•  Retains balance and fade
•  Micro “B” USB updatable

SATURN

Ion  

2006-2007

Vue  

2006-2007

• GMOS-LAN-06 Interface
• GMOS-LAN-06 harness
• 16-pin harness with stripped lead

Содержание GMOS-LAN-06

Страница 1: ...ping tool and connectors or solder gun solder and heat shrink Tape Wire cutter Zip ties TABLE OF CONTENTS Connections to be made 2 Installing the GMOS LAN 06 3 Programming the GMOS LAN 06 3 Adjusting the GMOS LAN 06 3 Troubleshooting 3 Saturn OnStar interface 2006 2007 APPLICATIONS Provides accessory power 12 volt 10 amp Maintains the retained accessory power R A P feature Retains OnStar OE Blueto...

Страница 2: ...n Blue Pink Blue White Green Green Black Green Purple Light Green Orange White Purple Purple Black From the GMOS LAN 06 harness to the aftermarket radio Connect the Yellow wire to the 12 volt constant battery wire Connect the Black wire to the ground wire Connect the Orange wire to the illumination wire If no illumination wire is present tape it off and disregard it Connect the Green wire to the l...

Страница 3: ...l 5 Test all functions of the installation for proper operation before reassembling the dash 6 If the interface fails to function refer to Troubleshooting Resetting the Axxess interface 1 The Blue reset button is located inside the Axxess interface between the two connectors The button is accessible outside the Axxess interface no need to open the Axxess interface 2 Press and hold the reset button...

Страница 4: ...fied technicians IMPORTANT If you are having difficulties with the installation of this product please call our Tech Support line at 1 800 253 TECH Before doing so look over the instructions a second time and make sure the installation was performed exactly as the instructions are stated Please have the vehicle apart and ready to perform troubleshooting steps before calling AxxessInterfaces com CO...

Отзывы: