4.
1.
2.
3.
1.
2.
3.
4.
5.
Then you'll get the Pacp captures.
System Log
To download system log via Web interface:
Click Management Configuration
Click
of the system Log
Then you'll get a txt file: syslog.tgz.
Upgrade
To upgrade via HTTP, the "Management""auto provision" " Firmware Upgrade" "Upgrade Mode" field needs to be set to HTTP, respectively. "Firmware
Server Path" needs to be set to a valid URL of a HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid
URL.
e.g. firmware.mycompany.com:5688/
Axtel
e.g. www.mycompany.com:5688/fm/
Axtel
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from
or use Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the
root/fm directory of the HTTP server.
(3) Visiting "http://192.168.0.254/fm/fw9
20
G.rom on localhost by browser" to verify the HTTP Server. If visiting "http://192.168.0.254/fm/fw9
20
G.rom on
another computer and it not prompted to download fw92
0
.rom file on this computer, please check if the firewall is on or off (Suggest you turn off the
firewall).
To configure the server path via Web interface:
Click Management Auto provision:
Select the upgrade mode in the Upgrade Mode field
Enter the Firmware Server Path and Config Server Path (192.168.0.254 is HTTP server).
Enter the HTTP server's username and password (optional).
Click the
button to save the configuration.
71
