1.
2.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
1.
2.
To configure DHCP via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network WAN Port IPv4 DHCP mode.
Click Save and restart the phone.
To configure a static IP address via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network WAN Port IPv4 Static mode.
Enter the parameters: IP, Netmask, Gateway, Pri.DNS(primary DNS), Sec.DNS (secondary DNS) in the corresponding fields.
Click Save and restart the phone.
Press the Save soft key to accept the change or the Cancel soft key to cancel. If you are using an xDSL modem, you can connect your phone to
the Internet via PPPoE mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain the IP
address. Contact your system administrator for the PPPoE user name and password.
To configure PPPoE via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network WAN Port PPPoE mode.
Enter the User ID and password
Click Save and restart the phone.
To configure Network via Web interface:
Click Network Basic IPv4 setting
Select the desired Type: DHCP, Static or PPPoE
Filled the necessary information.
Click the SaveSet and restart the phone.
IPv6
If you set IP Mode to IPv6,IP phone will use IPv6 address. IPv4 has two network modes: DHCP, Static
To configure IPv6 via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network WAN Port IP Port Mode.
26
