1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
1.
2.
3.
To Enable screen saver via Web interface
To Click Setting Preference
To choose the Time-out as 1 min or 2/5/10/30 minute.
To select the screen Type as Logo only or time & logo.
Click SaveSet to save the configuration.
To Disable screen saver via Web interface
To Click Setting Preference
To choose the Time-out as Off
Click SaveSet to save the configuration.
To custom text logo via Web interface:
Click Setting Preference.
Choose the Time-out as 1 min or 2/5/10/30 minute.
Enter the desired value in the Text Logo field.
Click SaveSet to save the configuration.
To wake up screen saver via Web interface:
Click Setting Preference
Choose Dial First Digit: Screensaver Wakes up or Screensaver Wakes up and Dial
Click
to save the configuration.
Gray Level
There are 20 levels. you can change the LCD's brightness according to your
visual perception
To change the gray level via Phone interface
Press Menu Settings Basic Setting Gray level
Press
and
or press Info/Switch soft key to Choose the level from 1 to 20
Press
or Save soft key to save the selected configuration
Time and Date
The time and date show on the idle page, and it can be set and change by SNTP server automatically or manual setting.
To configure the time and Date by SNTP setting
Press Menu Settings Basic Setting Time & Date SNTP Settings
Press
or
, or Info/Switch soft key to change the Time zone.
Fill the NTP server1, NTP Server2, and Daylight Saving.
21
