2
SSEMBLY INSTRUCTIONS
1
Remove products from the
Carry Case.
Untie the tent in an open space.
DO NOT
remove
Fiberglass Poles
from the sockets.
Inspect the
X Brackets
. All
X Brackets
(covered in removable felt fabric pouch) should be facing the same
direction.
TIP:
5 sided tent has 5 joints; 6 sided tent has 6.
PULL OUTWARD
SETTING UP STRUCTURAL WALLS
Locate
Lanyard Eyebolt Handle
(opposite side of the
X Bracket.
)
Step back as you pull on the
Lanyard Eyebolt
Handle
until the attached
X Bracket
pops
inward and becomes an interior wall. Repeat
until all walls are opened.
Tip 1:
Allow plenty of room when setting up tent walls as
they expand quickly like umbrellas. Point all parts,
X
Brackets
away from animals, children and by standers to
avoid injury.
Tip 2: (NOMAD™ Model):
Tent is packed with the curtains
zippered down. Reach inside the grommet to locate the
Lanyard Eyebolt Handle.
Lanyard Eyebolt Handle
LOCATE THE ENTRANCE
Check the roof line for
AxplorOutdoor Logo
which is imprinted on the top right corner of the entrance.
Once all walls are erected, adjust the tent to face a desired direction.
Unzip the mesh door to enter the tent.
2
3
4
5
