Axopar 22 SPYDER, Руководство пользователя

Страница: 41 / 118

6. Operation
Draining and tightness
Check that:
• There is no water in the bilge.
• All the bilge pumps are functional.
• The bilge has no signs of fuel or oil leaks.
• The deck drain system is clean and the valves are open.
• All deck hatches are tightly closed.
Electrical and engine
Check that:
• All the fuses are intact.
• The main switches are switched on.
• The batteries have enough power.
• The engine works properly.
• The engine cooling water flows as expected.
• The fuel level is sufficient.
WARNING
The specified tank capacity is not necessarily fully available, depending on the
trim and load on board. The tank should always be kept at least 20% full.
6.3.2. Checklist: After using the boat
Make sure that:
• The main switches are switched off.
• The septic tank discharge valve is closed.
• There is no water in the bilge.
• The bilge pumps are functional.
• The deck draining works properly and all the draining valves are open.
• All deck hatches, roof canvas and doors are tightly closed.
6.4. Handling the boat
6.4.1. Checklist: Boat handling before leaving harbor
For safe navigation under all weather conditions, proper sound signaling equipment in compliance with
regulations (COLREG, 1972) must be carried on board. Make sure that the sound signaling equipment
on the boat is compliant with these regulations.
Axopar 22 Spyder Document ID: 22S202103EN
Owner's Manual
© 2021 Axopar Boats Page 40
-
-