COMPLETE TRAINING FIRST.
CONFIRM THE CEW IS READY FOR USE
Check with your armorer to be sure firmware is up to date, the CEW has
the correct set-up for your agency and that the weapon, cartridges, and
battery packs have been properly assigned to you.
INSERT THE BATTERY
A) Insert the battery pack into the weapon. Press firmly until
you hear both latches “click.”
B) Inserting a new battery pack will synchronize the weapon’s logs to
the battery pack and may update the CEW firmware automatically.
Do not remove the battery pack from the CEW until the hourglass
icon disappears from the CID.
C O N D U C T E D E N E R G Y W E A P O N
Q U I C K S T A R T G U I D E
1
2
3
If the battery pack is fully charged,
the Critical Information Display (CID)
should look like this:
C) Shift the safety switch to the
down
(SAFE) position.
WORKING WITH CARTRIDGES
Point the CEW in a safe direction. Be sure the safety is in the down
(SAFE) position. Do not put your hands in front of the cartridges.
Remove the cartridges from the safety clip.
4
5
CARTRIDGE COLOR CODE
BLACK = Live Cartridge,
Standoff (3.5°) or
Close-quarter (12°).
For field use.
BLUE = Hook and Loop
Training (HALT) Cartridge,
Standoff (3.5°) or
Close-quarter (12°).
For training use only.
DO NOT USE IN FIELD.
RED = Inert Training
Cartridge (no probes).
For training use only.
DO NOT USE IN FIELD.
If you need assistance, please visit www.axon.com or contact technical support at: US: 1-800-978-2737; Australia: +1 800-051-2069; other international: +1 480-463-2170
TURN THE CEW ON AND OFF
A) Point the CEW in a safe direction.
B) Shift the safety switch to the up
(ARMED) position.
