Axon Body 3 Dock
Installation Manual
Axon Enterprise, Inc.
Page 9 of 25
Axon Body 3 Dock Installation
Install your Axon Dock as described in the following procedure.
Before installing an 8-Bay Dock, Axon recommends you determine if the dock will be
mounted on a desktop or on a
. 1-Bay Docks can be placed on a desktop or
shelf as needed.
If you do not have an Axon Evidence.com account, Axon recommends that you contact your
Axon administrator and ask for an account invitation. When the email invitation arrives,
accept the invitation and create an account. This email invitation will come from
[email protected].
1.
Remove the dock from the box and confirm that all pieces are present.
2.
Plug the Ethernet cable into the WAN port.
3.
Plug the other end of this Ethernet cable into an active Internet port, which connects to
your agency network.
4.
Connect the two segments of the power cord included with the dock.
WAN port
