Axon Body 3 Dock
Installation Manual
Axon Enterprise, Inc.
Page 12 of 25
Dimensions
The dimensions below show the mounting hole locations of the Wall Mount Bracket and the
overall size of the assembly with the dock attached. The power supply is designed to go
behind the unit on the horizontal shelf.
Note:
Dimensions are shown in inches and centimeters.
You can use the overall size of the wall mount bracket to determine the spacing and fit
between multiple assemblies. The Ethernet and Power connections are also shown above.
Installation
Step 1: Preparation
1.
Ensure that you have all necessary hardware and cables required to complete the
installation.
2.
Read all the manufacturer’s installation instructions for both the dock and the Wall
Mount Bracket.
3.
Decide if you will leave the cables showing or hide them in the wall behind your dock.
Step 2: Attach the Dock to the Wall Mount Bracket
1.
Place your dock on the Wall Mount Bracket.
2.
Align the holes of the dock with the holes on the bracket.
14.000 in CTR TO CTR
[35.6 cm]
17.50 in
[44.5 cm]
5.21 in
[13.2 cm]
7.375 in
CTR TO CTR
[18.7 cm]
7.55 in
[19.2 cm]
8.51 in
[21.6 cm]
Ethernet
Power
