Axminster Engineer Series, Руководство по эксплуатации

Страница: 17 / 20

Parts list 5 (Note: some type without the protective guard assembly)
No. Drawing No. Description Q'ty
5-1 GB 70-85 - M4 x 10 hexagon socket head cap screw M4*10 1
5-2 GB 70-85 - M4 x 12 hexagon socket head cap screw M4*12 3
5-3 XN3A2304 connect plate 1
5-4 X12304 block 1
5-5 the magnet block 1
5-6 X3C23C02 rotate shaft 1
5-7 ANSI B18.3.6M - M4x0.7 x 6 inner six angle locking screw-cone end metric M4*0.7*6 1
5-8 GB 96-85 - 6 washer 6 1
5-9 GB 889-86 - M6 hexagon locking nut M6 1
5-10 X3C23C0401 the inner shield 1
5-11 X3C23C03 outer protective cover 1
5-12 GB 819-85 - M4x10 cross recessed counter head screws M4*10 3
5-13 GB 97.1-85 - 5 washer 5 2
5-14 GB 835-88 - M5x20 knurled screws M5*20 2
5-15 X3C23C01 support plate 1
5-16 QKS7-5 safety limit switch 1
5-17 GB 818-85 - M4 x 25 cross recessed counter head screws M4*25 2
5-18 X3C23C05 spacer bush 1
5-19 X20003 dust guard 2
5-20 XN3A2302 rise and down guideway cover 1
Packing List
No. Name Description Q'ty Remarks
1 Bench Mill type: X2.7 or SX2.7 1 set
2 Fuse 110V/20A or 230V/10A 1 pce.
3 Manual manual 1 pce.
4 Double end wrench
S1*S2: 8*10
、
14*17
、
17*19
each 1
5 L hex wrench S: 3
、
4
、
5
、
6
、
8 each 1
6 U wrench assembly X3C004 1 pce.
7 Oil cup 1 pce.
8 T nut X22001 2 pcs.
9 L hex wrench assembly X3C2003
1
件
Below parts usually fixed on the machine (According to choice of MT3 or R8)
10* B16 drill chuck J2113/ 1-13mm / B16 1 pce.
MT3 type
11* MT3 taper shank X20206 1 pce.
12* locking bolt assembly X3C021100(X3C021101) 1 pce.
13* slanting wedge X3C2002 1 pce.
14* JT6 drill chuck 3-16mm / JT6 1 pce.
R8 type 15* R8 taper shank X302A04(A) 1 pce.
16* locking bolt assembly X3C021101B
（
7/16") 1 pce.
1
6