Axminster AW10BSB2 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 48

Axminster AW10BSB2 Скачать руководство пользователя страница 1

AW10BSB2,AW12BSB

2

Saw Bench

Axminster Tool Centre,
Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH

www.axminster.co.uk

The Axminster AW10BSB2 and AW12BSB2 Saw Benches are robust machines, constructed largely from
cast iron and heavy gauge steel. The 254mm or 315mm blades give a choice of cutting depth of 75mm
or 100mm, and are amply powered by a 2.2kW or 3kW 1ph induction motors. The cast iron table gives
great strength and rigidity as well as providing a smooth working surface. A full length rip fence, locks
onto rails at the front and back of the table, and is also equiped with a micro positioning adjustment
ensuring straight rip cuts. A mitre fence slides in a T slot groove in the table either side of the blade. Both
the blade height and tilt controls are conveniently located and lock in position. A pressed steel rear feed-
off table is also supplied. Dust extraction is provided on both the crown guard and under the blade for
efficient dust control, a 1,000 m3/hr extractor is recommended. As supplied, these machines are compact
in size but ready for work in the home or light trade workshop. Further options are available. 1, a kit of
two cast iron extension tables that can be fitted either one each side or both to the right of the blade,
complete with longer fence rails, and 2, a fully functioning sliding table kit to allow large board materials
to be cut. When both options are fitted this
saw bench becomes a very useful
machine for most jobs in the
workshop.

Code: 951537

AW10BSB2

Code: 951540

AW12BSB2

Code: 951539

AW10BSB2 AW12BSB2

Table Extension Set

Code: 951538

AW10BSB2

Code: 951541

AW12BSB2

Setup 1

Setup 2

Code: 718652

AW10BSB2

Code: 718653

AW12BSB2

Sliding Table Kit

Saw Bench Package

1
2
3
...
»

Содержание AW10BSB2

















































Отзывы:

Нет отзывов