Axminster Trade 105644, Оригинальное руководство пользователя

Страница: 16 / 28

Setting Up the Morticer
16
Pull the wheel out to engage the drive gear into the lead screw
thus enabling the table to move from front to back, see figs
31-32.
Front to Back Movement
Fig 31-32
Table rack
Drive gear
Table Distance Stops
To the front of the work table there are two collar stops to set
the required distance for repetitive work.
Loosen the collar clamping handle (A) and slide the collar
(B) along the collar stop bar (C) until the required distance is
reached then re-tighten the handle to lock the collar in position.
Repeat for the other collar, see figs 33-34.
Fig 33-34
A
B
C
Left to Right Movement Back to Front Movement