AXIS V5925 PTZ Network Camera
Additional settings
Note
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to
Settings > Image > Image correction
.
2. Turn on EIS.
Show an image overlay
To add an image as an overlay in the video stream:
1. Go to
Settings > Overlay
.
2. Click
Image list
.
3. Upload an image and click
Done
.
4. Click
Create overlay
.
5. Select
Image
and click
Create
.
6. Select the image from the drop-down list.
7. To position the image overlay, choose
Custom
or one of the presets.
8. Click
Create
.
Show the pan or tilt position as a text overlay
You can show the pan or tilt position as an overlay in the image.
1. Go to
Settings > Overlay
and click
Create overlay
.
2. Select
Text
and click
Create
.
3. In the text field, type
#x
to show the pan position.
Type
#y
to show the tilt position.
4. Choose appearance, text size, and alignment.
5. The current pan and tilt positions show up in the live view image and in the recording.
Adjust the camera view (PTZ)
Limit the pan, tilt, and zoom movements
If there are parts of the scene that you don’t want the camera to reach, you can limit the pan, tilt, and zoom movements. For
example, you want to protect the privacy of residents in an apartment building, which is located close to a parking lot that you intend
to monitor. To limit the movements, go to
Settings > PTZ > Limits
.
Control the camera with VISCA
There are two ways to control this camera with VISCA:
VISCA over IP -
Select this to communicate over the Ethernet.
VISCA over serial -
Select this to communicate over serial connection.
7
