Axis V5925 Скачать руководство пользователя страница 21

Страница: 21 / 25

AXIS V5925 PTZ Network Camera

Specifications

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

Red

Firmware upgrade failure.

Microphone power LED

Indication

Unlit

Phantom power off.

Blue

Phantom power on.

Note

• The tally LED (indication LED) only indicates network transmission. If video or audio is only transmitted through HDMI

or SDI the tally LED will be unlit.

Tally LED

Indication

Unlit

Camera idle.

Red

Active network transmission or recording.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports SD/SDHC/SDXC cards.

For SD card recommendations, see

axis.com

SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered

trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

Reset to factory default settings on page 16

•

Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.

Connectors

BNC connector

The BNC connector is used for connecting broadcast equipment using SDI. Connect a 75 Ohm coaxial SDI cable.

CAUTION

The connector may be hot during normal operation in elevated ambient temperatures.

Содержание V5925


























Результаты поиска

Содержание V5925

Отзывы:

Похожие инструкции для V5925

Бренды по названию

Популярные бренды

Axis V5925, Руководство пользователя

Результаты поиска

Содержание V5925

Отзывы:

Похожие инструкции для V5925

Бренды по названию

Популярные бренды