Axis StorPoint HD, Руководство пользователя

Страница: 36 / 95

Section 4: Accessing Networked Jaz Drives
AXIS StorPoint HD 35 User’s Manual
Note:
❏
In the Microsoft Network environment network resources are
accessed by specifying a server and a resource on that server using
the
\\server\resource
syntax (UNC - Universal Name
Convention). The resource is not, as could be imagined, a file
path. It is therefore impossible to replace the resource name with
the path to a file or folder on your Jaz disk. This means that if
using the file system as outlined on page 26, only Jaz folder access,
as described in “
Access Points ” on page 30, would be possible. To
overcome this problem the StorPoint HD will also make the
following resources available to the SMB clients:
• root , which includes the complete file system of the StorPoint
HD, used for root level access.
• nnnnnnnn , i.e. a folder for each Jaz disk, or Jaz drive if an alias
name for the SCSI ID has been set, used for mounting
individual Jaz disks to drive letters
Alternative Method of
Connection
If you have removed the default workgroup named ‘Workgroup’ the
StorPoint HD will not be visible in the browser until an existing
workgroup has been specified in the StorPoint HD. This is done by
the parameter
Domain/GroupName
. To connect to the StorPoint HD
do the following:
1. Start the Windows Explorer from the Start menu.
2. Select Map Network Drive... from the Tools menu.
3. Select a drive letter.
4. In the path box, type
\\AXIS<nnnnnn>\root
, where
<nnnnnn>
are
the six last digits of your StorPoint HD serial number.
5. Check Reconnect at logon if you wish to use the StorPoint HD
under the same drive letter the next time you start your computer.
6. Click the OK button. The StorPoint HD is ready for use.
You can edit your StorPoint HD configuration to make it appear in
any existing workgroup. See “Section 5 -
StorPoint HD
Configuration ”.