background image

AXIS Q6055-S PTZ Network Camera

Setup

About events

The event pages allow you to configure your product to perform actions when different events occur. For example, the product
can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when
the action is triggered is called an action rule.

How to trigger an action

1. Go to

Settings > System > Events

to set up an action rule. The action rule defines when the product will perform certain

actions. Action rules can be setup as scheduled, recurring, or for example, triggered by motion detection.

2. Select what

Trigger

must be met to trigger the action. If you specify more than one trigger for the action rule, all

of them must be met to trigger the action.

3. Select which

Action

the camera should perform when the conditions are met.

Note

If you make changes to an active action rule, the action rule needs to be restarted for the changes to take effect.

How to record video when the camera detects motion

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.

Make sure the AXIS Video Motion Detection application is running:

1. Go to

Settings > Apps

>

AXIS Video Motion Detection

.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs.

Create an action rule:

4. Go to

Settings > System > Events

and add an action rule.

5. Type a name for the action rule.

6. From the list of triggers, select

Applications

and then select

AXIS Video Motion Detection (VMD)

.

7. From the list of actions, select

Record video

.

8. Select an existing stream profile or create a new one.

9. Set the pre-trigger time to 5 seconds.

10. Set the post-trigger time to 60 seconds.

11. Select

SD card

from the list of storage options.

12. Click

Ok

.

How to automatically zoom in on a specific area with gatekeeper

This example explains how to use the gatekeeper functionality to make the camera zoom in automatically on the license plate of a
car that passes through a gate. When the car has passed, the camera zooms out to the home position.

Create the preset positions:

1. Go to

Settings > PTZ > Preset positions

.

2. Create the home position that includes the entrance of the gate.

12

Содержание Q6055-S
























Отзывы: