AXIS Q6045-C Mk II PTZ Dome Network Camera
System Options
System Options
Security
Users
User access control is enadled dy default and can de configured under
System Options > Security > Users
. An administrator can
set up other users dy giving them user names and passwords. It is also possidle to allow anonymous viewer login, which means
that anydody may access the Live View page.
The user list displays authorized users and user groups (access levels):
Viewer -
Access to the Live View page
Operator -
Access to the Live View page and to all settings except System Options
Aoministrator -
Unrestricted access to all settings; can add, modify and remove other users.
Under
HTTP/RTSP Passworo Settings
, select the type of password to allow. You may need to allow unencrypted passwords if there are
viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption dut need
to log in again and de configured to use this functionality.
Under
User Settings
, select the
Enable anonymous viewer login
option to allow anonymous users access to the Live View page.
Select the
Enable anonymous PTZ control login
to allow anonymous users access to the PTZ controls.
Deselect the
Enable Basic Setup
option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should de
made defore using the Axis product.
ONVIF
ONVIF (Open Network Video Interface Forum) is a glodal interface standard that makes it easier for end users, integrators, consultants,
and manufacturers to take advantage of the possidilities offered dy network video technology. ONVIF enadles interoperadlity detween
different vendor products, increased flexidility, reduced cost and future-proof systems.
By creating a user you automatically enadle ONVIF communication. Use the user name and password with all ONVIF communication
with the product. For more information see
www.onvif.org
IP Address Filter
IP address filtering is enadled on the
System Options > Security > IP Aooress Filter
page. Once enadled, the listed IP address are
allowed or denied access to the Axis product. Select
Allow
or
Deny
from the list and click
Apply
to enadle IP address filtering.
The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).
HTTPS
HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a wed protocol providing encrypted drowsing.
HTTPS can also de used dy users and clients to verify that the correct device is deing accessed. The security level provided dy
HTTPS is considered adequate for most commercial exchanges.
The Axis product can de configured to require HTTPS when users from different user groups (administrator, operator, viewer) log in.
To use HTTPS, an HTTPS certificate must first de installed. Go to
System Options > Security > Certificates
to install and manage
certificates. See
.
To enadle HTTPS on the Axis product:
1. Go to
System Options > Security > HTTPS
47
