Axis Q6032-E Скачать руководство пользователя страница 11

Страница: 11 / 55

AXIS Q6032-E PTZ Dome Network Camera

Media Streams

The Axis product provides several video stream formats. Your requirements and the properties of your network will determine the

type you use.

The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream pro

les.

Other applications and clients can access video streams directly, without going via the Live View page.

How to Stream H.264

The video compression standard H.264 makes good use of bandwidth, and can provide high quality video streams at less than 1 Mbit/s.

Deciding which combination of protocols and methods to use depends on your viewing requirements, and on the properties of

your network. The available options in AXIS Media Control are:

Unicast RTP

This unicast method (RTP over UDP) is used

for live unicast video, especially when it is

important to always have an up-to-date video

stream, even if some images are dropped.

RTP over RTSP

This unicast method (RTP tunneled over RTSP)

is useful as it is relatively simple to con

gure

rewalls to allow RTSP traf

RTP over RTSP over HTTP

This unicast method can be used to traverse

rewalls. Firewalls are commonly con

gured to

allow the HTTP protocol, thus allowing RTP to

be tunneled.

Unicasting is used for video-on-demand

transmission so that there is no video traf

on the network until a client connects and

requests the stream.

Note that there are a maximum of 20

simultaneous unicast connections.

Multicast RTP

This method (RTP over UDP) should be used for live multicast video. The video stream is always

up-to-date, even if some images are dropped.

Multicasting provides the most ef

cient usage of bandwidth when there are large numbers of

clients viewing simultaneously. A multicast cannot however, pass a network router unless the

router is con

gured to allow this. It is not possible to multicast over the Internet, for example.

Note also that all multicast viewers count as one unicast viewer in the maximum total of 20

simultaneous connections.

AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the

AMC Control Panel, can be changed and the options disabled, to suit speci

c requirements.

Note

H.264 is licensed technology. The Axis product includes one H.264 viewing client license. Installing additional unlicensed

copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller.

MJPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate suf

cient

to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image

contained in the stream. The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS

Media Control in Internet Explorer in Windows.

AXIS Media Control (AMC)

AXIS Media Control (AMC) in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product.

Содержание Q6032-E
























































Результаты поиска

Содержание Q6032-E

Отзывы:

Похожие инструкции для Q6032-E

Бренды по названию

Популярные бренды

Axis Q6032-E, Руководство пользователя

Результаты поиска

Содержание Q6032-E

Отзывы:

Похожие инструкции для Q6032-E

Бренды по названию

Популярные бренды