AXIS Q1715 Block Camera
Additional settings
Additional settings
Adjust the image
This section includes instructions about how to configure your device. If you want to learn more about how certain features
function, go to
.
Level the camera
To adjust the view in relation to a reference area or an object, use the leveling guide in combination with a mechanical adjustment
of the camera.
1. Go to
Settings > System > Orientation
and click
.
2. Adjust the camera mechanically until the position of the reference area or the object is aligned with the leveling guide.
Adjust the focus
This product has three focus modes:
•
Auto
: The camera automatically adjusts focus based on the entire image.
•
Area
: The camera automatically adjusts focus based on a selected area of the image.
•
Manual
: The focus is set manually at a fixed distance.
To turn off autofocus and adjust the focus manually:
1. In the live view window, if the
Zoom
slider is visible, click
Zoom
and select
Focus
.
2. Click
M
and use the slider to set the focus.
Select scene profile
A scene profile is a set of predefined image appearance settings including color level, brightness, sharpness, contrast and local
contrast. Scene profiles are preconfigured in the product for quick setup to a specific scenario, for example
Forensic
which is
optimized for surveillance conditions. For a description of each available setting, go to the help menu
and click
Help
.
You can select a scene profile during the initial setup of the camera. You can also select or change scene profile later.
1. Go to
Settings > System > Orientation
.
2. Go to
Scene profile
and select a profile.
3. Click
Done
.
Reduce image processing time with low latency mode
You can optimize the image processing time of your live stream by turning on low latency mode. The latency in your live stream is
reduced to a minimum.
1. Go to
Settings > System
.
2. Go to
Plain config > Image source
.
3. Go to
Low latency mode
and select
On
.
4. Click
Save
.
8
