AXIS Q1656 Box Camera Series
The device interface
Important
A network trace file might contain sensitive information, for example certificates or passwords.
A network trace file can help you troubleshoot problems by recording activity on the network. Select the duration of the trace in
seconds or minutes, and click
Download
.
Remote system log
Syslog is a standard for message logging. It allows separation of the software that generates messages, the system that stores
them, and the software that reports and analyzes them. Each message is labeled with a facility code, which indicates the software
type generating the message, and assigned a severity level.
Server
: Click to add a new server.
Host
: Enter the hostname or IP address of the server.
Format
: Select which syslog message format to use.
• RFC 3164
• RFC 5424
Protocol
: Select the protocol and port to use:
• UDP (Default port is 514)
• TCP (Default port is 601)
• TLS (Default port is 6514)
Severity
: Select which messages to send when triggered.
CA certificate set
: See the current settings or add a certificate.
Plain config
Plain config is for advanced users with experience of Axis device configuration. Most parameters can be set and edited from
this page.
Maintenance
Restart
: Restart the device. This does not affect any of the current settings. Running applications restart automatically.
Restore
: Return
most
settings to the factory default values. Afterwards you must reconfigure the device and apps, reinstall any
apps that didn’t come preinstalled, and recreate any events and PTZ presets.
Important
The only settings saved after restore are:
• Boot protocol (DHCP or static)
• Static IP address
• Default router
• Subnet mask
• 802.1X settings
• O3C settings
Factory default
: Return
all
settings to the factory default values. Afterwards you must reset the IP address to make the device
accessible.
44
