Axis P7316, Руководство пользователя

Страница: 24 / 27

AXIS P7316 Video Encoder
Specifications
SD card slot
NO NO NOTICE TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com .
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 19 .
Connectors
Bus connector
The bus connectors are the physical interfaces to the video encoder chassis that provide power, network, RS485, and I/O terminal
connections.
BNC connector
Each video input is terminated using a coax/BNC connector.
Connect a 75 Ohm coaxial video cable; the recommended maximum length is 250 m (800 ft).
Note
75 Ohm video termination can be enabled/disabled for the video input through the product's webpage at . Video termination
is enabled on factory default. If the product is connected in parallel with other equipment, for optimum video quality, we
recommended to enable video termination only for the last device in the video signal chain.
Network connector
RJ45 Ethernet connector.
Audio connector
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio input
24