Axis P7210, Руководство пользователя

Страница: 39 / 52

AXIS P7210 Video Encoder
System Options
If the card’s status shows as failed, click
Check disk
to see if the problem can be found and then try
Repair
.
To avoid fi lling the card, it is recommended to remove recordings continuously. Under Recording Settings , select Remove recordings
older than and select the number of days or weeks.
To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings .
For more information, see the online help .
Network Share
Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common
Internet File System) and use them for storage of recordings.
To add a network share:
1. Go to System Options > Storage .
2. Click
Network Share
.
3. Enter the IP address, DNS or Bonjour name to the host server in the
Host
fi eld.
4. Enter the name of the share in the
Share
fi eld.
5. If required, select The share requires login and enter the user name and password.
6. Click Connect .
To clear all recordings and data from the Axis product’s folder on the designated share, click
Clear
under
Storage Tools
.
To avoid fi lling the share, it is recommended to remove recordings continuously. Under
Recording Settings
, select
Remove recordings
older than
and select the number of days or weeks.
To stop writing to the share and protect recordings from being removed, select
Lock
under
Recording Settings
.
Ports & Devices
I/O Ports
The Axis product provides four con fi gurable input and output ports for connection of external devices. For information on how to
connect external devices, see Connectors, on page 4 .
The I/O ports are con fi gured under System Options > Ports & Devices > I/O Ports . Select the port direction ( Input or Output ). The
ports can be given descriptive names and their Normal states can be con fi gured as Open circuit or Grounded circuit .
Note
There are four I/O ports for each group of video input connectors.
COM Port
The video encoder has one RS-485/RS-422 serial port. The port supports the following modes:
•
Generic HTTP
allows the video encoder to receive data and send commands via HTTP.
• Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See for more information. Drivers can be
downloaded from www.axis.com
• Generic TCP/IP allows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisy
chain clients to communicate with the Axis product. See also RS-485/RS-422 connector, on page 43.
39