Axis M30 Series Скачать руководство пользователя страница 21

Страница: 21 / 23

AXIS M30 Network Camera Series

Specifications

Network connector (PoE)

Focus ring

LED Indicators

Note

• The Status LED can be configured to flash while an event is active.

• The Status LED can be configured to flash for identifying the unit. Go to

Settings > System > Plain config

Status LED

Indication

Unlit

Connection and normal operation.

Green

Steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

Red

Firmware upgrade failure.

Purple

Steady for more than 10 seconds for hardware failure.

Note

Amber is a combination of red and green, and can be perceived as either of these colors depending on viewing angle.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see

axis.com

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are

trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

Reset to factory default settings on page 16

Connectors

HDMI connector

Use the HDMI

connector to connect a display or public view monitor.

Содержание M30 Series
























Результаты поиска

Содержание M30 Series

Отзывы:

Похожие инструкции для M30 Series

Бренды по названию

Популярные бренды

Axis M30 Series, Руководство пользователя

Результаты поиска

Содержание M30 Series

Отзывы:

Похожие инструкции для M30 Series

Бренды по названию

Популярные бренды