AXIS P13 Network Camera Series
Additional settings
Image with WDR.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to
Settings > Image > Wide dynamic range
.
2. Turn on WDR.
3. Use the
Local contrast
slider to adjust the amount of WDR.
4. If you still have problems, go to
Exposure
and adjust the
Exposure zone
to cover the area of interest.
Find out more about WDR and how to use it at
Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration. You can add either text or an image.
Show a text overlay in the video stream when the device detects motion
This example explains how to display the text “Motion detected” when the device detects motion.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/43168#t10103832
How to show text overlay when the camera detects motion
Make sure that AXIS Video Motion Detection is running:
1. Go to
Settings > Apps
>
AXIS Video Motion Detection
.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Add the overlay text:
10
