The AXIS EVI-D30/31 - Installation Guide
Connecting and Installing the AXIS EVI-D30/31
To assign an IP address for the AXIS 2400/2401, please refer to the installation instructions in the AXIS 2400
& 2401 Administration Manual.
Connecting the EVI-D30/31 Video source to the AXIS 2400/2401
1. Attach the supplied BNC/RCA converter to a Video-IN port on the front panel of the AXIS 2400/2401.
2. Attach the supplied video cable
to the converter and plug the
other end of the cable into the
Video-OUT port of your AXIS
EVI-D30/D31 PTZ camera.
Connecting and Installing the Pan/Tilt
device
3. Connect the round connector of the supplied
VISCA cable to the VISCA-IN socket on the
AXIS EVI-D30/31 camera.
4. Connect the other end of the cable (9-pin D-Sub) to one of the COM-ports on the rear panel of the AXIS
2400/2401 Video server.
5. Open a browser window
and go to the AXIS
2400/2401 Home Page
by entering the IP
number you assigned to
the server. Click
Admin
.
You will now need to
provide your Admin password.
6. Click the icon for the COM-port you connected your AXIS EVI-D30/31 camera to. Now set the
Purpose
of
the port as
Pan Tilt
and then click the
Save
button.
7. Click the Pan Tilt icon that now appears under the COM-port.
8. Select the driver for the EVI-D30/D31 from the drop-down list and click
Save
.
9. Click the icon for the video input that will use the selected driver. Under
Pan Tilt Serial Port
, select the
COM-port you configured in steps 6 to 8.
10. Click
View Application
and verify the PTZ functionality by performing a few PTZ operations.
For more information about Pan/Tilt/Zoom operations, please see the AXIS 2400 & 2401 Administration
Manual.
Copyright Axis Communications AB 2001. Part No. 18675. v1.0
