Axis AXIS Q6042-E, Руководство по установке, Страница: 12 / 104

AXIS Q60 Series
LED Indicators
LED Color Indication
Unlit Connection and normal operation
Amber Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable
or lost.
Red Flashes red for firmware upgrade failure.
Status
Green Shows steady green for 10 seconds for normal operation
after restart.
Midspan LED Indicators
LED Color Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, flashing Slow flash when overcurrent or short circuit condition
on the port.
Port
Green, flashing Fast flash when input voltage is out of range or other
internal error.
AC Green Steady when AC power input connected.
Connectors
For specifications and operating conditions, see page 13 .
Network connector - RJ45 Push-pull Connector (IP66). Supports High Power over Ethernet (High
PoE). Use the supplied midspan.
NOTICE NOTICE NOTICE
• The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the midspan shall be shielded (STP) and intended for their specific use.
Make sure that the midspan is properly grounded. For information about regulatory
requirements, see
Regulatory Information, on page 2
.
• To comply with the IP66-rated design of the camera and maintain the IP66 protection,
the supplied RJ45 Push-pull Connector (IP66) shall be used. Alternatively, use the RJ45
IP66-rated cable with premounted connector which is available from your Axis reseller.
Do not remove the plastic network connector shield from the camera.
12