Axis AXIS P1353-E, Руководство по установке

Страница: 15 / 122

AXIS P13-E Network Camera Series
Specifications
Operating Conditions
Products Temperature Humidity
AXIS P1353–E
AXIS P1354–E
AXIS P1355–E
AXIS P1357–E -30 ºC to 50 ºC
(-22 ºF to 122 ºF) with PoE,
down to -40 ºC (-40 ºF) with High PoE
10 - 100% RH (condens-
ing)
Power Consumption
Product PoE High PoE
AXIS P1353–E
AXIS P1354–E
AXIS P1355–E
AXIS P1357–E
12.95 W
IEEE 802.3af/802.3at Type 1 Class 3 25.5 W
Connectors
I/O Connector
4-pin terminal block for:
• Auxiliary power (DC output)
• Digital Input
• Digital Output
• 0 V DC (-)
4 3 2 1
Note
The I/O connector is connected to the housing (fan/heater) on delivery. In the case of a fan
or heater error, an input signal will be triggered in the camera. Set up an action rule in the
camera to configure which action the signal shall trigger. For information about events and
action rules, see the User Manual available on
www.axis.com
Function Pin Notes Specifications
0 V DC (-)
1
0 V DC
DC output 2 Can be used to power auxiliary equipment.
Note: This pin can only be used as power out. 3.3 V DC
Max load = 50 mA
15
E
N
G
L
IS
H