Axis AXIS A8207-VE Mk II, Руководство пользователя

Страница: 19 / 27

AXIS A8207-VE Mk II Network Video Door Station
Troubleshooting
Troubleshooting
Reset to factory default settings
Important
Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to
the factory default values.
To reset the product to the factory default settings:
1. Disconnect power from the product.
2. Press and hold the control button while reconnecting power. See Product overview on page 4 .
3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.
4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset
to the factory default settings. If no DHCP server is available on the network, the default IP address is
192.168.0.90
.
5. Use the installation and management software tools to assign an IP address, set the password, and access the device.
The installation and management software tools are available from the support pages on axis.com/support .
You can also reset parameters to factory default through the device’s webpage. Go to Maintenance > Factory default and click
Default .
Check the current firmware version
Firmware is the software that determines the functionality of network devices. When you troubleshoot a problem, we recommend
you to start by checking the current firmware version. The latest firmware version might contain a correction that fixes your
particular problem.
To check the current firmware:
1. Go to the device interface > Status .
2. See the firmware version under Device info .
Upgrade the firmware
Important
Preconfigured and customized settings are saved when you upgrade the firmware (provided that the features are available in
the new firmware) although this is not guaranteed by Axis Communications AB.
Important
Make sure the device remains connected to the power source throughout the upgrade process.
Note
When you upgrade the device with the latest firmware in the active track, the product receives the latest functionality
available. Always read the upgrade instructions and release notes available with each new release before you upgrade the
firmware. To find the latest firmware and the release notes, go to
axis.com/support/firmware .
1. Download the firmware file to your computer, available free of charge at axis.com/support/firmware .
2. Log in to the device as an administrator.
3. Go to Maintenance > Firmware upgrade and click Upgrade .
19