ADDENDUM AXIS 215 PTZ-E Network Camera r1.0
Part no: 34142
How to install audio and I/O cables in AXIS
215 PTZ-E Network Camera
AXIS 215 PTZ-E Network Camera is delivered without hardware support for audio and I/O. However it
is possible to install cables for these.
Important!
•
Installing the cables for audio and I/O must be done only by an authorized technician.
•
Installing audio and I/O cables will nullify the IP-66 rating and AXIS 215 PTZ-E Net-
work Camera will no longer be suitable for outdoor use.
Follow these steps to install the audio and I/O cables:
.
1. Remove the wall bracket.
2. Remove the sunshield.
cut and remove the rubber gasket.
Caution
: Make sure not to damage the cables
3. Unscrew the cable gland;
while removing the rubber gasket. The rubber
gasket is now no longer usable, and the IP-66 rating
is no longer valid.
4. Remove the top by
unscrewing 3 screws.
