1/4
INSTALLATION
MAINTENANCE
SLICER
INSTALLATION
UNPACKING
Immediately on delivery unloading, please check whether machine packaging is eventually deteriorated
and in this case make necessary reservations on signing the delivery note. You will than check the
machine inside packaging and eventually contact immediately the carrier when it is damaged.
Prior to installation, test the electrical service to assure that it is in compliance with the specifications on
the machine data plate
1
.
ELECTRICAL
Warning:
THIS MACHINE IS PROVIDED WITH THIS PLUG MUST BE CONNECTED
TO PROPERLY GROUNDING PLUG, GROUNDED OUTLET. IF THE RECEPTACLE IS NOT THE
PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.
CLEANING
This machine must be thoroughly cleaned and sanitized after installation and before being put into
service.
SAFETY
SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR
CORRECT OPERATING POSITION EVERY TIME THE SLICER IS IN USE.
The
blade cover
6
must be in position over the knife and secured by tightening
the hand knob
7
.
The
Iast slice device 4
must be used when slicing, it keeps your hands away from the knife.
AX-S GLM12/N
Filename: Man_AX-S_GLM12_N_230609.PDM
RETURN