AXIS M50 PTZ Camera Series
Configure your device
3. In the list of actions, under
Preset positions
, select
Go to preset position
.
4. Select a
Video channel
.
5. Select the
Preset position
.
6. To make the camera wait a while before it returns to the home position, select
Home timeout
, and set a time.
7. Click
Save
.
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Go to
System > Detectors > Camera tampering
.
2. Set a duration for
Trigger after
. The value indicates the time that must pass before an email is sent.
3. Turn on
Trigger on dark images
to detect if the lens is sprayed, covered, or rendered severely out of focus.
Add an email recipient:
4. Go to
System > Events > Recipients
and add a recipient.
5. Type a name for the recipient.
6. Select
.
7. Type an email address to send the email to.
8. The camera doesn’t have it’s own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
9. To send a test email, click
Test
.
10. Click
Save
.
Create a rule:
11. Go to
System > Events > Rules
and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under
Video
, select
Tampering
.
14. In the list of actions, under
Notifications
, select
Send notification to email
and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click
Save
.
Audio
Add audio to your recording
1. Go to
Video > Stream > Audio
and include audio.
2. If the device has more than one input source, select the correct one in
Source
.
3. Go to
Audio > Device settings
and turn on the correct input source.
4. If you make any changes to the input source, click
Apply changes
.
5. Edit the stream profile that is used for the recording:
15
