AXIS P3935-LR Network Camera
Configure your device
Configure your device
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to
Level the camera
To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment
of the camera.
1. Go to
Video > Image >
and click
.
2. Click
to show the level grid.
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Select scene profile
A scene profile is a set of predefined image appearance settings including color level, brightness, sharpness, contrast and local
contrast. Scene profiles are preconfigured in the product for quick setup to a specific scenario, for example
Forensic
which is
optimized for surveillance conditions. For a description of each available setting, see
The device interface on page 18
.
You can select a scene profile during the initial setup of the camera. You can also select or change scene profile later.
1. Go to
Video > Installation
.
2. Go to
Scene profile
and select a profile.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to
Video > Image > Exposure
and select between the following exposure modes:
•
For most use cases, select
Automatic
exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select
Flicker-free
.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select
Flicker-reduced
.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select
Hold current
.
Optimize IR illumination
Depending on the installation environment and the conditions around the camera, for example external light sources in the scene,
you can sometimes improve the IR illumination if you manually adjust the intensity of the LEDs.
1. Go to
Video > Image > Day-night mode
.
2. Turn on
Allow illumination
.
3. Go to
and select
Manual
.
6
Содержание 01919-021
Страница 1: ...AXIS P3935 LR Network Camera User Manual ...
