AXIOMTEK UST200-83H-FL, Руководство пользователя, Страница: 3 / 57

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1. The UST200-83H-FL does not come equipped with an operating system. An
operating system must be loaded first before installing any software into the
computer.
2. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in
any static-shielded devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the UST200-83H-FL before making any
installation. Be sure both the system and the external devices are turned off.
Sudden surge of power could ruin sensitive components. Make sure the UST200-
83H-FL is properly grounded.
4. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
5. Turn OFF the system power before cleaning. Clean the system using a cloth only.
Do not spray any liquid cleaner directly onto the screen.
6. Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -45
℃
or above 85
℃
. It may damage the equipment.
7. Do not open the system
’
s back cover. If opening the cover for maintenance is a
must, only a trained technician is allowed to do so. Integrated circuits on computer
boards are sensitive to static electricity. To avoid damaging chips from
electrostatic discharge, observe the following precautions:

Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.

When handling boards and components, wear a grounding wrist strap,
available from most electronic component stores.
8. This product is intended to be supplied by a Listed Power Adapter or DC power
source, output meets SELV, rated 12-24Vdc, minimum 0.85-0.45A, Tma = 70
degree C, and the altitude of operation = 5000m.
If you need further assistance with purchasing the power source, please contact to
manufacturer for further information.
CAUTION
Risk of explosion may occur if the battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
WARNING
 Do not touch the hot surface of the system unit when it is turned on.

Restricted access area: The equipment should only be installed in a Restricted Access
Area.