AXIOMTEK PICO50R, Руководство пользователя

Страница: 28 / 82

PICO50R/PICO51R Pico-ITX Board
22 Board and Pin Assignments
2.5.10 Ethernet Ports (CN11 and CN12)
The board has two RJ-45 Ethernet connectors, CN12 for LAN1 with Intel
®
i219LM and
CN11 for LAN2 with Intel
®
i211AT. Ethernet connection can be established by plugging
one end of the Ethernet cable into this connector and the other end (phone jack) to a
1000/100/10-Base-T hub.
L1 L2 L3 L4 L5 L6 L7 L8
A B
A B
2.5.11 DisplayPort Connector (CN13)
The DisplayPort interface is available through connector CN13.
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100/10: Green/OFF
Pin Signal
1 DPB_LANE0
2 GND
3 DPB_LANE0#
4 DPB_LANE1
5 GND
6 DPB_LANE1#
7 DPB_LANE2
8 GND
9 DPB_LANE2#
10 DPB_LANE3
11 GND
12 DPB_LANE3#
13 Detect Pin
14 GND
15 DPB_AUX
16 GND
17 DPB_AUX#
18 DPB_HPD
19 GND
20 +3.3V