AXIOMTEK MPC240, Руководство пользователя

Страница: 55 / 58

MPC240 Series User
’s Manual
EMC Statement 45
Appendix B
EMC Statement
WARNING:
 MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and
needs to be installed and put into service according to the EMC information provided in
this manual.
 Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL
EQUIPMENT.
 The use of accessories, transducers and cables other than those specified by Alter-G
Incorporated, may result in increased EMISSIONS or decreased IMMUNITY of the
EQUIPMENT.
 This EQUIPMENT should not be used adjacent to or stacked with other equipment and
that if adjacent or stacked use is necessary, the EQUIPMENT should be observed to
verify normal operation in the configuration in which it will be used.
Guidance and manufacturer’s declaration – electromagnetic emissions
The device is intended for use in the electromagnetic environments listed below, and should
only be used in such environments:
Emission Test Compliance Electromagnetic Environment
– Guidance
RF emissions
CISPR 11
Group 1
RF energy is used only to maintain device’s operation.
Therefore, its RF emissions are so low that it’s not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The device is suitable for use in all establishments,
including domestic establishments, and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Meet the
requirement