AXIOMTEK GOT610-837, Руководство пользователя, Страница: 27 / 54

GOT610-837
User’s Manual
AMI BIOS Setup Utility 21
Chapter 3
AMI BIOS Setup Utility
The AMI UEFI BIOS provides users with a built-in setup program to modify basic system
configuration. All configured parameters are stored in a flash chip to save the setup information
whenever the power is turned off. This chapter provides users with detailed descriptions about
how to set up basic system configuration through the AMI BIOS setup utility.
3.1 Starting
To enter the setup screens, follow the steps below:
1.
Turn on the computer and press <F2> or <Del> during the Power On Self Test (POST) to
enter BIOS setup, otherwise POST will continue with its test routines.
2. After you press the <Del> key, the main BIOS setup menu displays. You can access the
other setup screens from the main BIOS setup menu, such as the Advanced and Chipset
menus.
If you wish to enter BIOS setup after POST, you can restart the system by pressing
<Ctrl>+<Alt>+ <Delete>, or by pressing the reset button on the system chassis. You may also
restart by turning the system off and then back on.
It is strongly recommended that you should avoid changing the chipset
’s defaults. Both AMI
and your system manufacturer have carefully set up these defaults that provide the best
performance and reliability.
NOTE Because the BIOS setup software is constantly being updated, the following setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.