©Copyright 2017 Axiomtek Co., Ltd.
Version A2 June 2017
Printed in Taiwan
9416K671010E
4
Installing the SO-DIMM
Step 1 Turn off the system and unplug the power-cord.
Step 2
There are four screws on the top heatsink are used to
fasten the heatsink to the chassis.
Step 3
Loosen these screws to remove the top heatsink then
you can find dual SO-DIMM sockets on main board.
Step 4
Locate the memory module, insert the gold colored
contact into the socket, and push the module down,
until it is firmly seated by locking two latches on the
sides.
Step 5 Assemble top heatsink with chassis through 4 screws
carefully to complete SO-DIMM installation.
Note: Please be informed that you can get more detail information in
eBOX671-885 user’s manual.
eBOX671-885-FL Quick Installation Guide
©Copyright 2017 Axiomtek Co., Ltd.
Version A2 June 2017
Printed in Taiwan
9416K671010E
1
Packing List
System Unit x 1
DVD/CD x 1 ( Driver & Manual)
Quick Installation Guide x 1
Foot Pad x4
Screws Pack x 1
Processor Thermal Pad
3 Pin Phoenix Connector x 1
Remote Switch Cable x 1
Optional Wall-mount Bracket
Optional Antenna & Module
Do not try to apply power to the system if any damaged components.
Dimensions
PoE Specification
Compliant:
- 4ports full-load, IEEE802.3af Class 2 (7Watt)
- 2ports full-load, IEEE802.3af Class 3 (15.4Watt)
- 1ports full-load, IEEE802.3at Class 4 (30Watt)
Power Output: Total maximum 30 watt for 4 ports
e
B
O
X
6
7
1
-8
8
5
-F
L
S
e
ri
e
s
E
m
b
e
d
d
e
d
S
y
st
e
m
