4 9418E848000E
©
Copyright 2015 Axiomtek Co., Ltd.
Version A1 September 2015
Printed in Taiwan
Quick Start
The basic procedures required to power on CAPA848:
(1). Require power at minimum 1A. Ensure that power supply is
OFF before connecting to CAPA848 and that all necessary
peripheral devices are plugged properly.
(2). Ensure all of the jumpers are at default settings; especially
JP10 (1-2 close).
(3). Firmly install DDR3L memory modules into connector
SSODIMM1 until fully seated.
Note: It must be DDR3L memory module.
(4). Firmly insert power to ATX1.
(5). Install a momentary on/off button/switch onto CN1, pin 9 and
10.
(6). Turn on the power supply.
(7). Press the on/off button/switch to power on CAPA848
CAPA848 Series Quick Installation Guide
9418E848000E 1
©
Copyright 2015 Axiomtek Co., Ltd.
Version A1 September 2015
Printed in Taiwan
Checklist
CPU Board x1
Product Information CD x1
Quick Installation Guide x1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Connectors
Connector
Description
CN1
Front Panel Connector
CN2 Inverter
Connector
CN3 LVDS
Connector
CN4 Audio
Connector
CN5
Digital I/O Port Connector
CN7 Fan
Connector
CN8 SMBus
Connector
CN9
USB Wafer Port 2 and 3
CN10 HDMI
Connector
CN11
COM3 and COM4 Connector
CN12
SATA Power Connector
CN14 VGA
Connector
ATX1 Power
Connector
SATA1 SATA
Connector
USB1
USB Port 0 and 1
LAN1 Ethernet
Port
1
COM1 COM1
Connector
COM2 COM2
Connector
BAT1
CMOS Battery Connector
SCN1
Half-size PCI-Express Mini Card Connector
SCN2
Full-size PCI-Express Mini Card Connector
SCN3
SIM Card Slot
SSODIMM1 DDR3L
SO-DIMM
Connector
CAP
A
848 Int
el
®
Celeron
®
Processor N2807 Capa Board
