4
9418E841020E
©
Copyright 2019 Axiomtek Co., Ltd.
Version A3 October 2019
Printed in Taiwan
Side View
Quick Start
The basic procedures required to power on CAPA841/842:
(1). Require power at minimum 2.5A. Ensure that power supply is
OFF before connecting to CAPA841/842 and that all
necessary peripheral devices are plugged properly.
(2). Ensure all of the jumpers are at default settings; especially
JP10 (1-2 close).
(3). Firmly install DDR3L memory modules into connector
SSODIMM1 until fully seated.
Note: It must be DDR3L memory module.
(4). Firmly insert power to ATX1.
(5). Install a momentary on/off button/switch onto CN1, pin 9 and
10.
(6). Turn on the power supply.
(7). Press the on/off button/switch to power on CAPA841/842
CAPA841/842 Series Quick Installation Guide
9418E841020E
1
©
Copyright 2019 Axiomtek Co., Ltd.
Version A3 October 2019
Printed in Taiwan
Checklist
CPU Board x1
Product Information CD x1
USB Cable x1
Quick Installation Guide x1
Audio Cable x1
COM Port Cable with Bracket,
P=2.0mm x1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Note: If the CPU board is with heatspreader, instead of
heatsink, please install cables prior to screwing heatspreader.
Jumper Settings
Before applying power to the CAPA841/842, please make sure all of the
jumpers are in factory default positions.
Jumper
Description
Setting
JP1
LVDS +3.3V/+5V Voltage Selection
Default: +3.3V
1-2 Close
JP2
Audio Output Selection
Default: Line-out
1-3, 2-4 Close
JP3
LVDS Brightness Control Mode Setting
Default: PWM Mode
1-2 Close
JP4
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP6
LVDS +12V Voltage Selection
Default: None
None
JP7
COM4 Data/Power Selection
Default: RS-232 Data
CN11 Pin 11: DCD
3-5 Close
CN11 Pin 18: RI
4-6 Close
JP8
COM3 Data/Power Selection
Default: RS-232 Data
CN11 Pin 1: DCD
3-5 Close
CN11 Pin 8: RI
4-6 Close
JP10
Auto Power On
Default: Disable
1-2 Close
JP11
COM2 Data/Power Selection
Default: RS-232 Data
COM2 Pin 1: DCD
3-5 Close
COM2 Pin 8: RI
4-6 Close
JP12
COM1 Data/Power Selection
Default: RS-232 Data
COM1 Pin 1: DCD
3-5 Close
COM1 Pin 9: RI
4-6 Close
C
A
P
A
8
4
1
/8
4
2
In
te
l
®
P
ro
c
e
ss
o
rs
C
a
p
a
B
o
a
rd
