4 94193291000E
©
Copyright 2015 Axiomtek Co., Ltd.
Version A1 April 2015
Printed in Taiwan
Jumper Settings
Before applying power to AX93291, please make sure all jumper(s) are in
factory default positions.
Jumper
Description
Setting
CN1 Pin 1: DCD
3-5 Close
JP1
COM1 Data/Power Selection
Default: RS-232 Data
CN1 Pin 8: RI
4-6 Close
COM1 Data/Power Selection (JP1)
The COM1 port (CN1) has +5V level power capability on DCD and +12V
level on RI by setting this jumper.
Assembly Drawing
Gently insert ZIO module into CPU board’s ZIO connector, see figure above.
Align assembly holes and use screws to firmly secure ZIO module to CPU
board. Be careful not to over-tighten the screws.
Description
Setting
Power: Set CN1 pin 1 to +5V level
1-3 close
Data: Set CN1 pin 1 to DCD (Default)
3-5 close
Power: Set CN1 pin 8 to +12V level
2-4 close
Data: Set CN1 pin 8 to RI (Default)
4-6 close
AX93291
AX93291 Quick Installation Guide
94193291000E 1
©
Copyright 2015 Axiomtek Co., Ltd.
Version A1 April 2015
Printed in Taiwan
Checklist
I/O board x1
Screw pack x1
Quick installation guide x1
Com cable x2
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the module if there is any damaged component.
Dimension and Fixing Holes
Module Layout
AX
93291 ZI
O Module
