USER MANUAL
ED150A
active point source loudspeaker
KEY FEATURES
• Near-field and mid-field sound reinforcement applications
• High quality, low distortion drivers
• Asymmetric HF coverage pattern
• PROEL CORE DSP and integrated Class D amplifier module
• Rotatable HF Horn for optimal horizontal coverage
• 35° monitor taper
• Water-repellent treatment of LF loudspeaker
• Various rigging hardware
INTRODUCTION
ED point source systems are designed for indoor and outdoor sound reinforcement applications
ranging from clubs, bars and restaurants to theatres, live music venues, houses of worship and theme
environments. The ED150A is a powered loudspeaker system able to deliver consistently repeatable
performance due to the PROEL CORE digital signal processing and the integrated Class D amplifier module.
The ED150A consists of an 15” LF drive unit and a 1.4” HF compression driver loaded by an asymmetric
HF horn in a compact enclosure, designed for many multi-purpose sound reinforcement activities. The
asymmetric HF coverage pattern, varying from 100° horizontal in the lower part of the horn for more
effective near field coverage, and narrowing to 60° horizontal at the top of the horn for more focused
coverage in the far field. The result is more accurate coverage of a typical auditorium than is possible with
a fixed horizontal coverage device. The HF horn is also rotatable through 90° by simply removing four screws
and realigning the horn, so that coverage can also be optimised for stage monitor use. This rotatable horn
feature also makes it possible to maintain the ideal coverage pattern when the cabinet is installed in a
horizontal (landscape) orientation. Its asymmetric dispersion pattern provides optimal coverage of typical
rectangular venues, with wider dispersion at the front and narrower dispersion at the rear.
This versatile loudspeaker can also be used as a low profile stage monitor with its 35° tapered side, and in
this situation the HF horn can be rotated to maintain the best coverage pattern for performers both near to
and further away from the monitor. ED150A cabinet is an unobtrusive and compact format designed for a
multitude of near field applications such as theatre under-balcony fill, stage front fill, delay speaker, bar and
restaurant audio, and discreet stage monitor. A pole mount socket make this a very versatile loudspeaker
in both portable and permanently installed applications.
TECHNICAL SPECIFICATION
Acoustical
Remote Controls
PRONET control software
System type
Point Source Loudspeaker
with asymetric HF Horn
Network protocol
CANBUS
Amplifier Type
Class D amplifier with SMPS
Low frequency transducer
15” (300 mm), 3” (75 mm) ISV aluminium
voice coil, 4Ω
Output Power
900W + 300W
Mains Voltage Range (Vac)
230 V~ ±15% or 115 V~ ±15% 50/60 Hz
High frequency transducer
1.4” (35.5 mm) compression driver, 2.4”
(60 mm) aluminium voice coil, Titanium
diaphragm, 8Ω
Mains Connector
PowerCon® (N NAC3MPB)
Consumption*
575 W (nominal) 1200 W (max)
IN / OUT Connectors
Neutrik XLR-M / XLR-F
Frequency response
50 Hz – 17 kHz (-6dB Processed)
IN / OUT Network Connectors
ETHERCON® (NE8FAV)
Horizontal Coverage Angle
60 to 100° (-6 dB)
Mechanical
Vertical Coverage Angle
60°, 1KHz to 17KHz (-6dB)
Width
450 mm (17.7”)
Maximum Peak SPL @ 1m
128 dB
Height
765 mm (30.1”)
Electrical
Depth
400 mm (15.8”)
Input Impedance
20 kΩ balanced
Taper angle
Stage Monitor: 35° - Frontfill: 7.5°
Input Sensitivity
+4 dBu / 1.25 V
Construction
15mm, reinforced phenolic birch
Signal Processing
CORE processing, 96kHz / 40bit floating
point SHARC DSP, 24 bit AD/DA converters
Paint
High resistance, water based paint
Suspension system
Direct access Controls
4 Presets: Standard, Low Cut, Monitor, User.
Network Termination, GND Link
Suspension
M10 Rigging points
or dedicated metal bracket
Net Weight
31 Kg (68.3 lbs)
* Nominal consumption is measured with pink noise with a crest factor of 12
dB, this can be considered a standard music program.
revision 2018-08-09
h100°
h60°
