Operation instructions | SKF 40-00M | SKF 41-00M | Multituner | FM Quattro module/19” unit
22
2019-09-29 | Technical improvements, changes in design, printing- and other errors expected.
Click on UPDATE.
The file will be uploaded to the device.
After this the update of the device begins, the remaining time ist shown as a countdown.
The module will be automatically rebooted after an update (setted parameters will not be lost).
After the update, log in again.
3.6.2.
Changing the IP address
The IP address, Netmask and the Gateway can be changed in the menu MAINTENANCE > SYSTEM OPTIONS.
The SAVE CHANGES button confirms and saves the changes.
When the IP address has been changed, the device will reboot automatically. The new IP address has to be
entered in the web browser and the enter password dialog will be displayed.
3.6.3.
Changing the password
The default password should be changed right after commissioning the module. The default password can be
changed in the menu MAINTENANCE > SET NEW PASSWORD.
The default password is:
Ramsen8262
.
Any new password must be 8-10 characters (letters and/or digits) long.
After changing the password, the module must be rebooted.
Содержание SKF 40-00M
Страница 1: ...SKF 40 00M SKF 41 00M Multituner FM Quattrokassette 19 Einheit Betriebsanleitung ...
Страница 27: ...2019 09 29 Technische Verbesserungen Änderungen im Design Druckfehler und Irrtümer vorbehalten 27 ...
Страница 29: ...SKF 40 00M SKF 41 00M Multituner FM Quattro module 19 unit Operation instructions ...
