Operation instructions | SKF 40-00M | SKF 41-00M | Multituner | FM Quattro module/19” unit
16
2019-09-29 | Technical improvements, changes in design, printing- and other errors expected.
3.3.
Initialization phase 1
Choose INITIALIZATION from the main menu.
During the first phase of the initialization, the tuner settings required for the scan are made and the station
scanning is carried out. The four tuners work independently from each other and after the same principle.
3.3.1.
DVB-S/S2/S2x
Click TUNER 1…4 to select one tuner.
Configure the needed settings for all tuners.
The SAT IF frequency of the transponder is entered in the input field
Freq (MHz).
The input fields
Low LNB LO Freq (MHz)
and
High LNB LO Freq (MHz)
correspond to the oscillator
frequencies of the LNB in low and high band. The default settings of the oscillator frequencies are 9,750 MHz
for the low band and 10,600 MHz for the high band.
In the optional field
Polarisation
, you can switch from horizontal to vertical.
In the optional field
DiSEqC
, the DiSEqC command signals can be turned off or set to switch a DiSEqC-enabled
multi switch on the positions 1 to 4.
If required, the operating voltage for the LNB can be switched off via the optional field
LNB Power
.
After all settings have been made, click SCAN
.
A rotating circle is shown during the scanning process.
Содержание SKF 40-00M
Страница 1: ...SKF 40 00M SKF 41 00M Multituner FM Quattrokassette 19 Einheit Betriebsanleitung ...
Страница 27: ...2019 09 29 Technische Verbesserungen Änderungen im Design Druckfehler und Irrtümer vorbehalten 27 ...
Страница 29: ...SKF 40 00M SKF 41 00M Multituner FM Quattro module 19 unit Operation instructions ...
