2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
33
Re-mapping PIDs by hand
If packets should get a very specific OUT PID, this can be entered manually.
Click in the OUT PID column of the program.
Enter the PID with the keyboard or increase/decrease the PID with the arrow keys.
Click on the green check mark.
This will complete the entry first.
Click SAVE CHANGES.
The entered PIDs are saved in the headend.
4.2.8.
PID Filtering (with MKS 1-01)
The transport streams consist of packets that are identified by PIDs (Packet Identifier). With the fee-based
software extension MKS 1-01, individual packages can be filtered out of the transport stream.
Click on one of the programs.
The table with the packages contained in the program is opened.
For the PIDs that you want to filter out of the transport stream, place a checkmark in the BLOCK
column (1).
The package is no longer transferred in the transport stream. The OUT PID column is empty for these
PIDs (2).
