18
D.
Cleaning the oven cavity sealing ring
To ensure the normal working of the oven, area around the cavity is equipped with sealing ring. It
should periodically be checked in sealed state. If the sealing ring is too dirty, it should be cleaned.
You can remove the ring to clean it. If the seal joint is damaged or looks worn off, please contact the
after-sale service department for replacement of the ring. Using the oven in the absence of sealing
ring will cause damage to it.
Take out the obturating ring from one side first, and then remove the obturating one by one fom the
other sides. (See figure 4).
1. Clean the obturating ring with water and dry it up.
2. Place back obturating ring one side at a time.
INSTRUCTIONS FOR USING THE ACCESSORIES
A. Installation around layer frame (see figure 1):
1. Install the left/right layer frame in the cavity in the fixed screw position;
B. Grill rack insertion location (see figure 2):
Figure 4
Layer
frame
1
2
3
4
5
6
Figure 2
Figure 1
