AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE
– [email protected] – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 -
Capital : 500 000,00 €
Fichier :
AT-07
tablet
user
guide20190423_AT-
07_user_guide AT-07 tablet
Version : V1.0
24/46
Select Using LAN, you can choose to open DHCP or fixed IP mode, the DHCP mode, you can click again
to reacquire to make the device to obtain an IP address from a DHCP server. In the static IP status, you
can modify the NIC's IP address, subnet mask, gateway, and DNS, DNS is divided into two, namely
DNS1 and DNS2, should first set the DNS1.
3.2.5
PPPoE Dial(Connect OTG Cable)
Connect OTG line to the OTG interface of the device to connect with Ethernet. Icon PPPoE
will appear on the status bar.To make the network port PPPoE dial, pull-down prompt bar, select
PPPoE icon
(the icon is blue means PPPoE dial is connected, the icon is white means PPPoE
dial not connected), PPPoE Properties window pops up, as shown below:
In the dial-up interface to enter a user name and password, click CONNECT to establish PPPOE
link.
3.2.6
Input Method
Click the application's text box; the system will automatically bring up the built-in input method. As
shown below under English operation interface, the input method:
